The delivery movement combines one or greater packages with one or more impartial time bases into a single stream. TS is an audio, video and data PES packets multiplexed onto circulate built for transmission purposes. The packet header contains a whole lot of records which had to be de-multiplex and decode the flow. The PID, that’s the packet identifier, which is available inside the TS packet header. The continuity counter exists to make certain all packets are obtained and obtain in an appropriate order. The multiple program transport stream (MPTS) is a combination of one or more packages in the transport stream. And, in the single program transport stream (SPTS) consist only one program of the transport stream. Both SPTS and MPTS have a set of packet duration for transmission. The transport streams are designed for long distance travels which include storage and transmission of data as well as information. The error in the transport stream is the lack of packets. The delivery system can be constant or variable both are useful but constant is highly used. The elementary stream which can be an audio, video or data of the transport stream might also either be constant or variable rate. Transport stream format: In the transport stream the user must first decide that this specific PID being used and then filter the packets that the matching PID value. For a user help it is perceive that which PID corresponds to which program, a completely unique set of elementary streams, referred to as signal Tables. It is transmitted of each and every application that is to be carried in signal tables are dispatched one at a time to PES, any may not be synchronized The block diagram of Transport Stream layer PID is shown on the next page. The PID value of PAT is 0x000. The PID value of CAT is 0x001. Describe the set of PIDs related to a program, e.g. It includes information of the bearer network used to transmit the MPEG multiplex, consisting of the service. TS packet Payload Part: The Payload in a TS packet contains two type of information: The length of a TS packet is constantly 188 bytes to facilitate multiplexing and mistakes correction, however the payload information can vary because the packet header has optionally available fields. Every MPEG-2 TS packet includes 184 bytes of payload facts prefixed with the aid of a 32 bit header.